[03.05.08] Shaker Racer - N95/N82/N93i/5500/N95 8gb SIS
2 posters
meo786 :: Mobile Applications :: S60 3rd
Page 1 of 1
[03.05.08] Shaker Racer - N95/N82/N93i/5500/N95 8gb SIS
Shaker Racer - N95/N82/N93i/5500/N95 8gb SIS
When you're playing a racing game or using an RC car,
you will very often move your whole body when driving through tight
turns or accelerate with full speed — but the control itself is very
often still done through abstract buttons on a game controller or
keyboard.
ShakerRacer does not need this additional layer and allows you to control an RC car directly through your movements — by using the acceleration sensor of your mobile phone. It works in a very intuitive way: just tilt your phone in the direction you want to drive. That's it!
The car that we used is based on a standard €90 RC car bought from a
toy shop. We modded it to accept Bluetooth instead of the proprietary
wireless module that it was shipped with. A small microcontroller and a
Bluetooth module replace the original wireless components. On the side
of the mobile phone,
a Python script translates the input of the acceleration sensor to
commands that the microcontroller can understand in order to manage the
steering servo as well as the main motor.
It turned out that this is a very intuitive and natural way to control
the car. You do not need any practice as the concept can be understood
instantly. So there's nothing that can block your way to fun!
Keep in mind that the phone cannot simply connect to an out-of-the-box
RC car, as the standard wireless remote control of a car uses some
proprietary protocol and technology for communication. Only by adding a
microcontroller + Bluetooth module, you can make the car understand
Bluetooth and enable it to communicate with the phone. Stephan Selinger
has written some short instructions on how to accomplish this, but it
requires some hardware ownership as well as –knowledge.
The Python application now uses the official Nokia Sensor-API by default. This allows using the mobile client with the Nokia 5500,
N95 (Firmware 20+), N95 8GB, N93i and the N82. For the N95 with older
firmware, you can reconfigure the code to still use the very nice aXYZ
Python-module from Cyke64.
Attached Images
http://rapidshare.com/files/112263255/ShakerRacer_-_N95.rar.html
When you're playing a racing game or using an RC car,
you will very often move your whole body when driving through tight
turns or accelerate with full speed — but the control itself is very
often still done through abstract buttons on a game controller or
keyboard.
ShakerRacer does not need this additional layer and allows you to control an RC car directly through your movements — by using the acceleration sensor of your mobile phone. It works in a very intuitive way: just tilt your phone in the direction you want to drive. That's it!
The car that we used is based on a standard €90 RC car bought from a
toy shop. We modded it to accept Bluetooth instead of the proprietary
wireless module that it was shipped with. A small microcontroller and a
Bluetooth module replace the original wireless components. On the side
of the mobile phone,
a Python script translates the input of the acceleration sensor to
commands that the microcontroller can understand in order to manage the
steering servo as well as the main motor.
It turned out that this is a very intuitive and natural way to control
the car. You do not need any practice as the concept can be understood
instantly. So there's nothing that can block your way to fun!
Keep in mind that the phone cannot simply connect to an out-of-the-box
RC car, as the standard wireless remote control of a car uses some
proprietary protocol and technology for communication. Only by adding a
microcontroller + Bluetooth module, you can make the car understand
Bluetooth and enable it to communicate with the phone. Stephan Selinger
has written some short instructions on how to accomplish this, but it
requires some hardware ownership as well as –knowledge.
The Python application now uses the official Nokia Sensor-API by default. This allows using the mobile client with the Nokia 5500,
N95 (Firmware 20+), N95 8GB, N93i and the N82. For the N95 with older
firmware, you can reconfigure the code to still use the very nice aXYZ
Python-module from Cyke64.
Attached Images
http://rapidshare.com/files/112263255/ShakerRacer_-_N95.rar.html
meo786 :: Mobile Applications :: S60 3rd
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|