How to Upgrade, Repair, Disassemble a Nokia Mobile

[You must be registered and logged in to see this link.]Disassembling, painting and LED modding illustrated.

[You must be registered and logged in to see this link.]Illustrated dismantling instructions.
[You must be registered and logged in to see this link.]This illustrated guide explains how to add a blue SMD LED (in German).
[You must be registered and logged in to see this link.]Keypad flashing: this helpfull video shows all you need to get the keypad out and a new one in.
[You must be registered and logged in to see this link.]A concise take cellphone take apart and repair guide with pictures.
[You must be registered and logged in to see this link.]A comprehensive LCD replacement manual.
[You must be registered and logged in to see this link.]A detailed tutorial explaining how to open the housing and solder another kind of SMD LEDs onto the logic board (in German).

[You must be registered and logged in to see this link.]How to refurbish a broken cell phone a flashlight.
[You must be registered and logged in to see this link.]An illustrated dismantling tutorial.
[You must be registered and logged in to see this link.]First remove the battery cover, battery and SIM card. Turn the phone over and remove the front cover. It just pulls off and you can go on to substitute the LCD screen.
[You must be registered and logged in to see this link.]Cellphone take apart and LCD substitution guide.
[You must be registered and logged in to see this link.]A small cellularphone take apart guide.

[You must be registered and logged in to see this link.]LCD replacement: an illustrated step-by-step DIY tutorial.

[You must be registered and logged in to see this link.]An illustrated autopsy tutorial.
[You must be registered and logged in to see this link.]A short keypad flashing videp tutorial.
[You must be registered and logged in to see this link.]Take apart instructions and pictures.
[You must be registered and logged in to see this link.]Replacement guide to get the keypad out and another one into the cellphone.
[You must be registered and logged in to see this link.]All the tips and tricks to get the phone display replaced.
[You must be registered and logged in to see this link.]How to replace the display of a mobile phone.

[You must be registered and logged in to see this link.]This cellphone teardown guide can be useful if you have questions about LCD substitution.
[You must be registered and logged in to see this link.]Relive the glory days with this NES Controller that has been modified into a cellphone. Everything is original - the buttons and casing.
[You must be registered and logged in to see this link.]A brief video about creating an NES controller cellphone. The electronics used didn't quite fit, so it ended up a little flat [video].
[You must be registered and logged in to see this link.]An illustrated take apart and reassembly manual.
[You must be registered and logged in to see this link.]Everything you need to know to get the keypad changed.
[You must be registered and logged in to see this link.]There is only one special tool required to get to the inside of this cellphone, take a Torx 6 screwdriver.

[You must be registered and logged in to see this link.]Working with normal AA-batteries.
[You must be registered and logged in to see this link.]Display modding (in Swedish).
[You must be registered and logged in to see this link.]Opening manual - just see how simple it is and do it by yourself. Picture of the PCB (Printed Circuit Board).
[You must be registered and logged in to see this link.]How to open the housing and add a vibration motor.
[You must be registered and logged in to see this link.]Tools, parts list and soldering tips to get the SMD LEDs replaced (in German).
[You must be registered and logged in to see this link.]Changing LED (call.: Blue LED solution) can be very simple.

[You must be registered and logged in to see this link.]Illustrated dismantling instructions.
[You must be registered and logged in to see this link.]This HOWTO explains how to add a vibration motor into the housing of the mobile phone (in German).
[You must be registered and logged in to see this link.]How make the LEDs blink in sync with the vibration motor (in German).
[You must be registered and logged in to see this link.]How to add a vibration motor (in German).
[You must be registered and logged in to see this link.]Four solutions to avoid the flicker of white LEDs, caused by the DC/CD convertor (V105 TEA1210TS) (in German).
[You must be registered and logged in to see this link.]A short HOWTO showing how to take apart the cellular phone and add a vibration motor, no soldering required (in German).

[You must be registered and logged in to see this link.]A second life for an old mobile phone: how to build a remote car heater control system (in German).
[You must be registered and logged in to see this link.]This guide provides a step-by-step tutorial explaining the replacement of the SMD LEDs (in German).
[You must be registered and logged in to see this link.]How to substitute the LEDs with blue one (in German).
[You must be registered and logged in to see this link.]How to put a vibration alarm motor into the cellphone (in German).
[You must be registered and logged in to see this link.]LED replacement tutorial: how to change the LED to a new color, e.g. blue, red, white or orange (in German).
[You must be registered and logged in to see this link.]Schematics for building a data cable for the cell phone (in German).

[You must be registered and logged in to see this link.]LCD display schematics and disassembly images.
[You must be registered and logged in to see this link.]A step-by-step dissection guide.
[You must be registered and logged in to see this link.]Cellphone take apart and LCD screen replacement tutorial.
[You must be registered and logged in to see this link.]Take apart notes and pictures.
[You must be registered and logged in to see this link.]Exploded view and parts list.
[You must be registered and logged in to see this link.]Home made Pokia: retro-fitting an old telephone handset to a mobile phone.

[You must be registered and logged in to see this link.]Detailed disassembly HOWTO.
[You must be registered and logged in to see this link.]PhoneGlow: How to change the background-light from green to blue.
[You must be registered and logged in to see this link.]How to open, instructions and pictures.
[You must be registered and logged in to see this link.]Strobo-Phone: How you put in a LED, or in this case: a blinking LED.
[You must be registered and logged in to see this link.]This illustrated guide shows how to rip the LCD from the mobile phone and attach it to a LPT printer port (in German).
[You must be registered and logged in to see this link.]How to make a custom I/O button. This HOWTO explains how to create a mold from hard plaster and filling it with silicone. This HOWTO explains how to create a caliper mold from hard plaster and filling it with silicone (in German).

[You must be registered and logged in to see this link.]How to remove a part L511 from the logic board which caused accidentical hangups (in German).
[You must be registered and logged in to see this link.]If you have any questions about the screen replacement for this cellphone, just take this illustrated guide.
[You must be registered and logged in to see this link.]Illustrated dissection manual.
[You must be registered and logged in to see this link.]How to solder SMD LEDs on to the logic board, step-by-step manual with dissection photos (in German).
[You must be registered and logged in to see this link.]This tutorial describes how to take the cellphone apart and invert the display by changing the foil (in German).
[You must be registered and logged in to see this link.] (in German).

[You must be registered and logged in to see this link.]Keypad flashing made easy. This video takes you through all neccessary take apart and re-assembly steps.

[You must be registered and logged in to see this link.]Disassembly video explaining how to flash the keypad.
[You must be registered and logged in to see this link.]Disassembly picture gallery and HOWTO.
[You must be registered and logged in to see this link.]An illustrated step-by-step SMD-LED modding tutorial (in German).
[You must be registered and logged in to see this link.]LCD replacement and cellphone dissection tutorial.
[You must be registered and logged in to see this link.]How to change the LEDs.

[You must be registered and logged in to see this link.]Do you want to change the color of the cellphone display? This HOWTO tells you how to change the LEDs (in German).
[You must be registered and logged in to see this link.]LCD module pinouts.
[You must be registered and logged in to see this link.]LCD display schematics and disassembly images.
[You must be registered and logged in to see this link.]Dismantling guide and images.
[You must be registered and logged in to see this link.]Added a nice LED inside the phone (in Finnish).
[You must be registered and logged in to see this link.]Illustrated opening and soldering techniques to get the SMD LEDs replaced.

[You must be registered and logged in to see this link.]Tools and take apart instructions to get the keypad changed [video].
[You must be registered and logged in to see this link.]Keypad flashing instruction video.
[You must be registered and logged in to see this link.]A step-by-step explanation to keypad flashing [video].
[You must be registered and logged in to see this link.]Complete dismantling tutorial.
[You must be registered and logged in to see this link.]If you have any questions about getting this cellular phone disassembled and the LCD screen substituted try this illustrated tutorial.
[You must be registered and logged in to see this link.]Opening instructions and pictures.

[You must be registered and logged in to see this link.]Changing LEDs, programming netmonitor, cheat codes.
[You must be registered and logged in to see this link.]Pinout scheme (in German).

[You must be registered and logged in to see this link.]Schematics for a selfmalde data cable.
[You must be registered and logged in to see this link.]Selfmade DLR-3 cable.
[You must be registered and logged in to see this link.]Building a serial data cable (RS-232) (in German).
[You must be registered and logged in to see this link.]Adding an answer/end call button to a headset.

[You must be registered and logged in to see this link.]Opening instructions and pictures.
[You must be registered and logged in to see this link.]Complete take apart image gallery.
[You must be registered and logged in to see this link.]Tools, parts and soldering techniques to get the SMD LEDs converted to another color (in German).
[You must be registered and logged in to see this link.]How to change the LEDs: take part pictures and soldering tips (in German).
[You must be registered and logged in to see this link.]Changing the display and keyboard illumination color.
[You must be registered and logged in to see this link.]A standard audio amplifier adaptor for the headset. A headset is useful device when you are outdoors. At home you may prefer speaking directly to the phone. But you can connect the phone to your hi-fi amplifier at home and play music on the line, record the calls, and use it as a "wireless microphone".

[You must be registered and logged in to see this link.]How to exchange the original LEDs to blue LEDs (in German).
[You must be registered and logged in to see this link.]An illustrated take apart tutorial.
[You must be registered and logged in to see this link.]A short-circuit to get the backlight always on (this is the same technique as used in the car kit) (in German).
[You must be registered and logged in to see this link.]An illustrated LCD screen substitution tutorial.
[You must be registered and logged in to see this link.]This HOWTO shows how to put blue SMD LEDs into the mobile phone housing (in German).
[You must be registered and logged in to see this link.]All the tools (Torx-6 screwdriver, tweezers, wire cutter, gloves, soldering iron) and tricks you need to get the LEDs changed (in German).

[You must be registered and logged in to see this link.]Take apart and LCD screen replacement guide with photos.
[You must be registered and logged in to see this link.]Cellphone LCD screen replacement and disassembly guide.
[You must be registered and logged in to see this link.]Disassembly pictures and HOWTO.
[You must be registered and logged in to see this link.]In case you have to replace the LCD screen you need to put this phone back together in a slightly different order to how you took it apart.
[You must be registered and logged in to see this link.]To take apart this cellular phone remove the back cover, the battery, the SIM card, the stylus and the memory card. Remove the four screws you can see now, then pull the coloured outer band outwards at various points, this will release the clips holding the band in place.
[You must be registered and logged in to see this link.]Do want to mod up the housing of this cellphone? Look up this detailed take apart pictures.

[You must be registered and logged in to see this link.]How to open the protector case, an illustrated guide.
[You must be registered and logged in to see this link.].
[You must be registered and logged in to see this link.]Opening guide with pictures.
[You must be registered and logged in to see this link.]Controlling a mobile phone display with an Atmel-AVR chipset.
[You must be registered and logged in to see this link.]An illustrated take apart HOWTO.
[You must be registered and logged in to see this link.]Illustrated faceplate installation guide.

[You must be registered and logged in to see this link.]How to add a dimmer to the mobile phone backlight, a soldering manual with pictures, electronic parts list, and schematics.
[You must be registered and logged in to see this link.]How to disassembly the housing and attach a screen protector foil (in German).
[You must be registered and logged in to see this link.]Integrated LED flashlight.
[You must be registered and logged in to see this link.]To get this cellphone open start near the top of the phone and run something like the edge of a credit card around the join of the front cover to release it. Now you are able to go further on to replace broken parts, for example the LCD.
[You must be registered and logged in to see this link.]This manual explains how to open the housing and replace the SMD LEDs (in German).
[You must be registered and logged in to see this link.]If you have any questions about repairing this cellphone check this illustrated guide.

[You must be registered and logged in to see this link.]Run a plastic tool around the edge of the join of the camera surround to unclip it. Now you can proceed further to get the LCD replaced.
[You must be registered and logged in to see this link.]How to take the cellphone apart carefully and get access to the circuit board and the LCD.

[You must be registered and logged in to see this link.]Many old Nokia cellular phones have graphical LCDs based on the PCD8544 controller. These are perfect for various electronic projects with microcontrollers. The interface is a two-wire serial type (clock and data), and some additional signals. The LCD supply is a single 3.3 V with very low supply current. This is not really a "hack"; we are merely re-using parts of the phone.
[You must be registered and logged in to see this link.]Exploded drawing with parts list.
[You must be registered and logged in to see this link.]Keypad replacement: this video guide gives you some assistance.
[You must be registered and logged in to see this link.]LED color conversion guide: soldering, parts, schematics, pictures and explanations (in German).

[You must be registered and logged in to see this link.]Dismantling instructions with illustrations.
[You must be registered and logged in to see this link.]How to open the housing with a Torx screw driver and replace the cover (in German).
[You must be registered and logged in to see this link.]This step-by-step tutorial tells you everything you need to know for changing the cellphone LEDs (in German).
[You must be registered and logged in to see this link.]How to remove the LCD frame to get inside the cellphone an substitute the LCD screen.
[You must be registered and logged in to see this link.]To replace the LCD screen you now need to remove the front cover. It's held on with clips around edge. Run something like a credit card all the way around the join of the front cover and it will unclip.
[You must be registered and logged in to see this link.]HOW-TO: Make a Nokia Pop port to female mini jack with volume control for the HDS-3 cable to the headset.

[You must be registered and logged in to see this link.]Take apart picture gallery.
[You must be registered and logged in to see this link.]Cellphone take apart guide, describing how to replace the keypad.
[You must be registered and logged in to see this link.]After you have detached back cover, battery and SIM card you can the front cover away from the phone. To get to innards of the cellphone follow this guide.
[You must be registered and logged in to see this link.]A teardown report with disassembly photos.
[You must be registered and logged in to see this link.]Instead of the official service manual for this phone this tutorial may also help you with the cellphone disassembly and screen exchangement.
[You must be registered and logged in to see this link.]A short guide to disassembly and LCD panel substitution.

[You must be registered and logged in to see this link.]Take apart HOWTO and image gallery.
[You must be registered and logged in to see this link.]Display cover removal for dust cleaning, an illustrated tutorial.
[You must be registered and logged in to see this link.]How to fit a replacement LCD screen to a mobilephone.
[You must be registered and logged in to see this link.]Your cellphone screen doesn't work anymore, this DIY replacement guide will help.
[You must be registered and logged in to see this link.]This video is particularly useful for those of you looking to replace a speaker, ribbon cable or keypad rather than just the LCD, although this is covered very well too.
[You must be registered and logged in to see this link.]An illustrated guide to LCD changing.

[You must be registered and logged in to see this link.]This guide provides assistance to get the LEDs changed to LEDs with another color (in German).
[You must be registered and logged in to see this link.]You don't like the color of the original LEDs? Here are some pictures explaining how to get the conversion done (in German).
[You must be registered and logged in to see this link.]An illustrated take apart guide to prepare the removal of the LCD.
[You must be registered and logged in to see this link.]Illustrated take apart tutorial.
[You must be registered and logged in to see this link.]How to attach SMD diodes to the logic board: a soldering manual (in German).

[You must be registered and logged in to see this link.]A guide to mobile phone screen replacement.

[You must be registered and logged in to see this link.]All you need to know about swapping the LCD screen: take apart guide, tools, tricks and pics.
[You must be registered and logged in to see this link.]Dismantling and reaassembly guide with pictures.
[You must be registered and logged in to see this link.]How to achieve a background color hardware inversion of the monochrome LCD display by attaching a polarization foil behind the screen (in German).
[You must be registered and logged in to see this link.]LED replacement HOWTO: parts list and soldering tips (in German).
[You must be registered and logged in to see this link.]This video guides you through keypad flashing.
[You must be registered and logged in to see this link.]Dismantling instructions with pictures.

[You must be registered and logged in to see this link.]Take apart explantions and pictures.
[You must be registered and logged in to see this link.]How to replace the BL-5C battery with a BL-6C.
[You must be registered and logged in to see this link.]This unofficial take apart manual helps in replacing a broken LCD screen.
[You must be registered and logged in to see this link.]An illustrated teardown and LCD replacement manual.
[You must be registered and logged in to see this link.]Project: LogiNoki - Logitech G5 Laser Mouse and Nokia 6610 Mobile Phone LCD Screen Hybrid.
[You must be registered and logged in to see this link.]Pictures from the inside, dismantling instructions.

[You must be registered and logged in to see this link.]An illustrated opening and take apart tutorial.
[You must be registered and logged in to see this link.]Illustrated opening tutorial.

[You must be registered and logged in to see this link.]Exploded view and parts list.
[You must be registered and logged in to see this link.]Parts list and exploded drawing.
[You must be registered and logged in to see this link.]To take the cellphone apart and the LCD replcaced, first remove the battery cover, battery, SIM and memory card. To remove the camera surround you need a tool with a slight hook on the end to release two clips.
[You must be registered and logged in to see this link.]To take the mobilephone apart, first remove the battery cover & battery. Than remove the aerial cover/camera lens. Two clips hold this in place, so lift these back first then run something like a credit card around the join to remove the aerial cover. Tools required: Torx 6 screwdriver.

[You must be registered and logged in to see this link.]Opening instructions and pictures.
[You must be registered and logged in to see this link.]An illustrated take apart HOWTO.
[You must be registered and logged in to see this link.]LCD display schematics and disassembly images.
[You must be registered and logged in to see this link.]Take apart pictures and HOWTO.
[You must be registered and logged in to see this link.]An illustrated take apart guide showing how to replace the display LEDs.
[You must be registered and logged in to see this link.]How to change SMD LEDs: an illustrated walk through (in German).

[You must be registered and logged in to see this link.]LED replacement: tools, tricks and take apart tutorial (in German).
[You must be registered and logged in to see this link.]Take apart guide with illustrations.
[You must be registered and logged in to see this link.]Opening and take apart HOWTO.
[You must be registered and logged in to see this link.]Take apart HOWTO with illustrations.
[You must be registered and logged in to see this link.]Complete step-by-step dismantling guide with images.
[You must be registered and logged in to see this link.]How to get access to the circuit board and the LCD.

[You must be registered and logged in to see this link.]Dismantling guide and illustrations.
[You must be registered and logged in to see this link.]How to make the phone work with regular sized MMC's.
[You must be registered and logged in to see this link.]Take apart instructions and pictures.
[You must be registered and logged in to see this link.]Wide angle attachment made from a lense out of another camera and attached with duct tape.

[You must be registered and logged in to see this link.]Complete illustrated step-by-step take apart guide, with an overview about all the neccessary tools for a professional job.
[You must be registered and logged in to see this link.]Spare parts list and exploded view.

[You must be registered and logged in to see this link.]This guide is not the official service manual, but it will help you to get the cellphone apart nevertheless.
[You must be registered and logged in to see this link.]Remove the back cover, battery, SIM and memory card. Now you can remove the six black screws, three on each side, to get the cellphone dissected.
[You must be registered and logged in to see this link.]Dissection HOWTO and images.
[You must be registered and logged in to see this link.]Behind the cover, pictures of a disassembly.
[You must be registered and logged in to see this link.]How to take apart explanation with images.
[You must be registered and logged in to see this link.]An illustrated step-by-step LED conversion manual (in German).

[You must be registered and logged in to see this link.]Bored with the color of the mobilephone display? This guide explains how to replace the LEDs (in German).
[You must be registered and logged in to see this link.]Disassembly photo gallery.
[You must be registered and logged in to see this link.]Pictures from the inside, disassembly tips and tools.
[You must be registered and logged in to see this link.]A take apart tutorial with pictures.

[You must be registered and logged in to see this link.]Take apart and soldering instructions for changing the LEDs (in German).
[You must be registered and logged in to see this link.]Under the hood, dissection pictures and instructions.

[You must be registered and logged in to see this link.]This tutorial explains how to disassemble the mobile phone and replace the LEDs (in German).
[You must be registered and logged in to see this link.]Illustrated take apart instructions.
[You must be registered and logged in to see this link.]How to fix a notorious screen flake.
[You must be registered and logged in to see this link.]Opening instructions and illustrations.
[You must be registered and logged in to see this link.]How to make a solar charger.
[You must be registered and logged in to see this link.]Illustrated dismantling tutorial.

[You must be registered and logged in to see this link.]Step-by-Step disassembly guide to making your own Metal Black cellphone.
[You must be registered and logged in to see this link.]Starting at the top, run your fingernail around the join of the front cover and it will release. This tutorial reveals all the neccessary details you need to know to get the phone display changed.
[You must be registered and logged in to see this link.]First remove the front cover. Now you are able to remove the two screws which fix the metal LCD frame.
[You must be registered and logged in to see this link.]Take apart picture gallery.
[You must be registered and logged in to see this link.]How to use a plastic shim to lift the antenna cover away from the phone (some force is required) and replace the screen.
[You must be registered and logged in to see this link.]To get the LCD screen exchanged first remove the battery cover, battery, SIM and memory card. Now run a plastic tool all the way around the join of the front cover in order to release the clips that hold it in place.

[You must be registered and logged in to see this link.]This free manual assists in exchanging a defunct LCD screen.
[You must be registered and logged in to see this link.]A complete step-by-step take apart tutorials with many photos.
[You must be registered and logged in to see this link.]Can You Hear Me Now? Do-it-yourself cell phone antenna.
[You must be registered and logged in to see this link.]A disassembly video with details from the inside of the mobile phone [video].
[You must be registered and logged in to see this link.]Got questions about how to substitute the LCD screen of this cellphone? Take this free illustrated guide.

[You must be registered and logged in to see this link.]Need to fix a smashed screen, here are all the tips and tricks to get the job done.

[You must be registered and logged in to see this link.]Run your fingernail or the edge of a credit card around the join of the top half of the cellphone to release the clips which hold the front cover on. Now you are ready to disconnect the ribbon connector to the LCD screen, which can be exchanged then.
[You must be registered and logged in to see this link.]An illustrated disassemble and LCD changing guide.
[You must be registered and logged in to see this link.]Use a plastic shim, e.g. a guitar plectrum or a credit card to lift the top keypad away from the phone and get access to the LCD.
[You must be registered and logged in to see this link.]All the information you need to replace a broken screen.
[You must be registered and logged in to see this link.]How to take apart the cellphone, substitute the LCD screen and resassemble it.
[You must be registered and logged in to see this link.]How to fix a jerky slider, you need: scissors, tweezers, T5/T6 screw driver and tape.

[You must be registered and logged in to see this link.]This tutorial explains how to take the cellphone apart and swap a broken LCD screen.
[You must be registered and logged in to see this link.]Ultimate loose/wobbly slider fix! Here is a guide explaining you how to fix your loose slider with a screwdriver and some cellotape.
[You must be registered and logged in to see this link.]Step-by-step instructions to get the mobile phone apart and the LCD screen substituted.
[You must be registered and logged in to see this link.]This video shows how to strip a cellphone from its dignity.
[You must be registered and logged in to see this link.]How to fix a wobbly slider. An illustrated tutorial with take apart instructions (in German).
[You must be registered and logged in to see this link.]Take apart and LCD replacement guide with pics.

[You must be registered and logged in to see this link.]No officical service manual at hand? Just remove the battery cover, battery, SIM and memory card. Now push the slide up and remove the two screws to gain access to the innards of the cellphone.
[You must be registered and logged in to see this link.]Illustrated dismantling HOWTO.
[You must be registered and logged in to see this link.]Side Talking is dead. Long live Rear Talking. How to move speaker and microphone to the back.

[You must be registered and logged in to see this link.]A step-by-step guide to LCD replacent. The guide comes with helpful photos.
[You must be registered and logged in to see this link.]A hand-painted mobile phone cover.
[You must be registered and logged in to see this link.]How to make a RiverSpy2 monitoring system.

[You must be registered and logged in to see this link.]Homemade datacables: DLR-3P and DAU-9.
[You must be registered and logged in to see this link.]Frequently Asked Questions for Data Cables.
[You must be registered and logged in to see this link.]How to add a backlight dimmer to a mobile phone (in German).
[You must be registered and logged in to see this link.]How to fix overheating BL-5C batteries. There are two steps to find out if the Nokia battery you have on your phone has a potential to overheat or *shudder* explode.