how to repair ???? using 2nd hand uem
3 posters
meo786 :: Nokia :: Nokia Hardware
Page 1 of 1
how to repair ???? using 2nd hand uem
how to repair ???? using 2nd hand uem
this is the instruction..
this is an actual step by step procedure
this is the reading before i change uem...
[You must be registered and logged in to see this image.]
1st replace 2ndhand uem...must be good...
after changing uem, read the uem in jaf to be sure that the uem you replace is good
and to get also the serial number.
open your jaf, check then go to imei tool, then read uem..
must be like this..
[You must be registered and logged in to see this image.]
next step is making an ask file using ufs..
just follow the instruction...
[You must be registered and logged in to see this image.]
must be like this..
[You must be registered and logged in to see this image.]
now you have ask file...done..
next is calculating ask file to rpl...
go to c, program file, odeon, p-key access..be sure that u have atleast
10 credits or logs to use...
do this...
[You must be registered and logged in to see this image.]
all done...
you have the rpl..
next and last step is writing rpl to unit...
open ufs click check then write uem like stated below..
[You must be registered and logged in to see this image.]
after this open your rpl click it then
[You must be registered and logged in to see this image.]
writing uem done...
this is the instruction..
this is an actual step by step procedure
this is the reading before i change uem...
[You must be registered and logged in to see this image.]
1st replace 2ndhand uem...must be good...
after changing uem, read the uem in jaf to be sure that the uem you replace is good
and to get also the serial number.
open your jaf, check then go to imei tool, then read uem..
must be like this..
[You must be registered and logged in to see this image.]
next step is making an ask file using ufs..
just follow the instruction...
[You must be registered and logged in to see this image.]
must be like this..
[You must be registered and logged in to see this image.]
now you have ask file...done..
next is calculating ask file to rpl...
go to c, program file, odeon, p-key access..be sure that u have atleast
10 credits or logs to use...
do this...
[You must be registered and logged in to see this image.]
all done...
you have the rpl..
next and last step is writing rpl to unit...
open ufs click check then write uem like stated below..
[You must be registered and logged in to see this image.]
after this open your rpl click it then
[You must be registered and logged in to see this image.]
writing uem done...
[You must be registered and logged in to see this image.] | This image has been resized. Click this bar to view the full image. The original image is sized 1024x768. |
Re: how to repair ???? using 2nd hand uem
thank's so much sir.... this solution so long i'm waiting...... once again thanks very2 much
ferrari- Moderator
- Number of posts : 232
Age : 39
Location : indonesian
Job/hobbies : repairing handphone
Mode (i.e. cool, angry etc) : yes
Warining :
Rate by Admin :
Reputation : 0
Registration date : 2008-02-28
re:
"itz really the best post i have ever seen in any of the forum becz itz the practical one preceeding with theory"
mobilespeed- VIP Moderator
- Number of posts : 61
Age : 54
Location : mobile vicinity
Job/hobbies : abc
Mode (i.e. cool, angry etc) : cool
Warining :
Rate by Admin :
Reputation : 2
Registration date : 2008-03-27
Similar topics
» MOBILE REPAIR v2.2
» nokia 1110 car broblme
» <<Booommm use second hand uem on working pcbs solution
» Nokia N70 !00% solution of White display and Hand at start
» repair nokia
» nokia 1110 car broblme
» <<Booommm use second hand uem on working pcbs solution
» Nokia N70 !00% solution of White display and Hand at start
» repair nokia
meo786 :: Nokia :: Nokia Hardware
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|